產品名稱：無負壓加壓泵站自動模糊控制系統

電子無負壓供水系統裝置工作原理

電子設備無壓差供排水公司試驗裝置進行串接在污水供排水公司管上，在水泵電機進水并且沒有及時正確地處理端和溢水端分為的安裝負荷傳調節器器，信息采集實時監控負荷變動的信號并送至重心的調整單位。其虛擬現實浮堰單位、模模糊糊的調整單位、定時拾取單位、負荷PID的把握單園，經的把握管理中心協調機制運算的把握抽水泵組自動的作業。

自己化一個現實游戲浮堰可在入熱水管道中行成幾道一個現實游戲浮堰，其做用與真人浮堰相似，其浮堰高強度可確認的有效控制面板開關智能化人設，預期正常情況下運作時的有效控制最web前端入水計劃有水壓終究不超過自己化浮堰人設值，這就確認了最web前端自來熱水官網中身邊觀眾不被壓差關系，供電控制系統化只對越來自己化浮堰的供發電量對其進行一直在線疊壓，充分地利用率了自來熱水官網中現有有水壓，非常大升幅的節儉了交流電，當自來熱水官網中因錯誤碼導致來水有水壓及來供發電量不充分時，越來自己化浮堰的供發電量接著被系統化高層杭州自來水輸出，以維持供電的不斷性。當越來浮堰的供發電量為零時，裝備自己停下轉動。當自來熱水官網中復原正常情況下只有有越來浮堰的供發電量突然出現，裝備會自己正常情況下運作高層杭州自來水。

在智能電子無壓差供排水系統設備會直接串接在日常自來水供排水系統管上，省略了普通的發動機水箱，從從來上防止了水與臭氧層接受而導致的分批危害。

電子無負壓產品優點

1、 拆遷賠償占地小。

2、 汽車涉水組件少、面積小，電商調節器組件不會水銹鈣鎂離子反應。

3、 防正壓整個過程可表明來排水量同步操作加壓泵，來幾個加幾個，有的流量為零時才宕機。

4、 能夠呵護自來水管管道壓力差免受正壓的影響，且人設調整靈便便宜。

5、 蒸汽管道串連，能夠充分用了污水水進壓強，機器設備作業學習速度快。

6、 機器設備完整密閉式與包氣隔開，保障污水水質沒受環境破壞。

Working principle of electrical water supplying system device without negative pressure

 The device is directly connected to the tap water supplying pipes with a concatenation, and pressure sensors will be mounted respectively at the water in-let and out-let ends to collect real time pressure alterative signal and send to the central control unit. Its Virtual floating weir unit, fuzzy control unit, automatic follower unit, pressure PID control unit, through the central coordinative calculation, will control the water pump group to automatically work.

Electrical virtual floating weir can generate a virtual floating weir in water in-letting pipes, its function is equal to real floating weir, whose height can be adjusted smartly through the control panel, its actual motion can sustain the front end water in-letting pressure to be always higher than the value fixed by the electrical floating weir, and thus to ensure that the users surrounding the front end water pipe net won’t be affected by the negative pressure. The water supplying devices only make online overlying of the water quantity that has crossed the floating weir, which has sufficiently taken usage of the original pressure of the water pipe net, thus to save the power as much as possible. When the water pipe net can’t supply enough water or water pressure because of any error, the water crossing the floating weir will be continuously output with additional pressure from the system, thus to sustain continuous water supply. When there is no water crossing the floating weir, the device will stop automatically to accumulate pressure, when the water supply pipe net is recovered, only there is water crossing the floating weir, the device will automatically operate and accumulate pressure.

Because the electrical water supplying devices without negative pressure is connected directly to the water supplying pipe, the traditional water tank is saved, thus to avoid the secondary pollution from the contact between water and atmosphere.

Advantage of electrical products without negative pressure:

     1、Small area taken.

      2、Less parts and areas interfered by water, electrical sensing parts won’t be affected by incrustation.       3、The negative pressure protective process can accumulate pressure symmetrically as per the incoming water quantity, which only stops when the water flow is zero.       4、Effectively protect the water supply pipe net from being affected by the negative pressure, with smart setting and debugging modes.       5、Pipe line is connected with concatenates, which sufficiently takes advantage of the pressure from incoming water, more efficiency.       6、Device is totally sealed and isolated from atmosphere, thus to avoid pollution.