產品名稱：第三代電子式無負壓供水加壓設備

電子無負壓供水系統裝置工作原理

微電子無壓強差集中供暖傳動裝置就直接串接在干凈的自來水集中供暖管上，在自吸泵手表進水端和有水出端對應重新安裝壓強感知器，采樣立即壓強變換移動信號并進入管理中心操作象限測試卷。其一個浮堰象限測試卷、模湖操作象限測試卷、自然伴隨象限測試卷、壓強PID調節機組，經調節管理中心協調機制運算調節增壓泵組自然正常運作。

電商虛擬主機技術浮堰可在水進管道中確立那道虛擬主機技術浮堰，其功能與真實可靠浮堰相似，其浮堰層面可確認把控好顯示屏協調性調控，其實一般運作時把控好前沿水進對象的的的壓力一直不達不到電商浮堰調控值，這就以保護了前沿自來給水管道工程工程附進訪客不再的的壓力差的影響，供電安裝只對超過電商浮堰的水流量做好優酷云疊壓，徹底利用率了自來給水管道工程工程本來的的的的壓力，更大增長幅度的不僅節約了能耗，當自來給水管道工程工程因錯誤碼存在來水的的的壓力及來水流量不足之處時，超過電商浮堰的水流量依然被軟件系統后加壓泵內容輸出，以保護供電的陸續性。當超過浮堰的水流量為零時，機械設施設備智能進行使用。當自來給水管道工程工程復原一般只需要有超過浮堰的水流量導致，機械設施設備會智能一般運作后加壓泵。

仍然電子元器件無的負壓給水系統配置就直接串接在純凈水給水系統管上，免去了了傳統的的水箱蓋，從基本上避免出現了水與典雅沾染而轉變成的多次環保問題。

電子無負壓產品優點

1、 占室內地戶型戶型小。

2、 車輛涉水元件少、平數小，微電子調節器元件不在水堿鈣鎂離子導致。

3、 防壓差步驟可會按照來發電量搜集施壓，來幾個加幾個，有用戶量為零時才宕機。

4、 有效性保護措施自來水管污水管道負荷免受正壓會影響，且因素整改非常方便非常方便。

5、 導壓管串聯和并聯，有力利于了杭州自來水滲水負擔，裝備啟動能力高。

6、 儀器截然緊閉與典雅切斷，確定水質量不易生態破壞。

Working principle of electrical water supplying system device without negative pressure

 The device is directly connected to the tap water supplying pipes with a concatenation, and pressure sensors will be mounted respectively at the water in-let and out-let ends to collect real time pressure alterative signal and send to the central control unit. Its Virtual floating weir unit, fuzzy control unit, automatic follower unit, pressure PID control unit, through the central coordinative calculation, will control the water pump group to automatically work.

Electrical virtual floating weir can generate a virtual floating weir in water in-letting pipes, its function is equal to real floating weir, whose height can be adjusted smartly through the control panel, its actual motion can sustain the front end water in-letting pressure to be always higher than the value fixed by the electrical floating weir, and thus to ensure that the users surrounding the front end water pipe net won’t be affected by the negative pressure. The water supplying devices only make online overlying of the water quantity that has crossed the floating weir, which has sufficiently taken usage of the original pressure of the water pipe net, thus to save the power as much as possible. When the water pipe net can’t supply enough water or water pressure because of any error, the water crossing the floating weir will be continuously output with additional pressure from the system, thus to sustain continuous water supply. When there is no water crossing the floating weir, the device will stop automatically to accumulate pressure, when the water supply pipe net is recovered, only there is water crossing the floating weir, the device will automatically operate and accumulate pressure.

Because the electrical water supplying devices without negative pressure is connected directly to the water supplying pipe, the traditional water tank is saved, thus to avoid the secondary pollution from the contact between water and atmosphere.

Advantage of electrical products without negative pressure:

     1、Small area taken.

      2、Less parts and areas interfered by water, electrical sensing parts won’t be affected by incrustation.       3、The negative pressure protective process can accumulate pressure symmetrically as per the incoming water quantity, which only stops when the water flow is zero.       4、Effectively protect the water supply pipe net from being affected by the negative pressure, with smart setting and debugging modes.       5、Pipe line is connected with concatenates, which sufficiently takes advantage of the pressure from incoming water, more efficiency.       6、Device is totally sealed and isolated from atmosphere, thus to avoid pollution.